A horgok és láncok ellenőrzése és a használati óvintézkedések

Mint mindannyian tudjuk, a hevederek használata során ahorgokés a láncok elhasználódnak a használati alkalmak számának növekedésével. Az ok, amiért ellenőriznünk kell ahorgok and chains so as to ensure the safety of the hoisting operation, especially After the horog and chain have been used for a while. How should we inspect all aspects of horgok and chains and what are the precautions? Precautions for the inspection of lifting horgok: As far as possible, the frequently used horgok should be inspected every season. The main purpose is to ensure the two possibilities of the horog body and the dangerous section. When checking the lifting horog, wash the horog body with kerosene first, and then use a 20-fold magnifying glass to check the horog body for cracks. If cracks are found, stop using it and replace with a new horog.When the high degree of wear of the dangerous section reaches 10% of the original height, it also needs to be replaced in time. Precautions for the inspection of the lifting chain: The normal use temperature range of the lifting chain is between -40°C and 200°C, and it is forbidden to use irregular connectors to link between the chains during use. Avoid the phenomenon of overloading of the chain which will seriously affect the safe service life of the lifting sling. Through the above introduction, we must understand that the safety of the entire lifting operation is inseparable from the correct operation, and it is also inseparable from the inspection and maintenance of the various parts of the lifting sling, so when you use the horog and chain It is necessary to do a good job of inspection in time, and pay attention to the precautions in the operation process, so as to effectively ensure that the lifting sling can achieve safe and reliable hoisting work.